trainguy77
Dec 1, 04:09 PM
still waiting on a 64-Bit SMP client
I thought it was 64-bit? After all there is no 32 bit linux version yet so I would think the OS X version is 64 bit.
I thought it was 64-bit? After all there is no 32 bit linux version yet so I would think the OS X version is 64 bit.
robshakir
Feb 24, 02:36 PM
Have u had any problems with the slow trackpad that people have been complaining about on the Rev D models?
You might want to check out this:
http://homepage.mac.com/bhines/mousezoom.html
Rob
You might want to check out this:
http://homepage.mac.com/bhines/mousezoom.html
Rob
yenko
Sep 24, 11:09 PM
You could try putting the drugs down and doing a serious reality check. :D
Shooot! That may be no fun at all. :(
Shooot! That may be no fun at all. :(
Loopie
Apr 28, 10:32 AM
I have an Emac that turns on, but doesn't start properly; the screen stays black and the fan is working. It used to beep/flash a light a couple of times to indicate what was wrong (unfortunately I don't remember how many times, but sort of remember looking up what it meant - I think it was a motherboard or CPU issue), but the beeping/flashing and chiming stopped.
Has anyone dealt with a similar issue and what was wrong with your Emac?
Has anyone dealt with a similar issue and what was wrong with your Emac?
more...
jdreier
Apr 29, 08:04 PM
I do use smc fan control while i'm encoding. It does a pretty good job. Keeps the temps down around 80C while encoding with fan rpm around 3800.
obeygiant
Feb 28, 01:02 PM
Shuttle Launch from the window of a passenger plane. (http://www.youtube.com/watch?v=GE_USPTmYXM)
more...
iSimx
Apr 18, 05:15 PM
Nice shot, would be nice if there were less clouds around the mountain as it covers a lot of it up and is distracting. Plus would use just a very slight increase in vibrancy just to make the colours pop a bit more. also slightly increase contrast through Levels... again only a touch. that's only from my personal point of view though. Here's a slight adjustment for what it's worth.. http://img814.imageshack.us/img814/7536/editedu.jpg
KyleGP
May 4, 02:06 AM
I agree.
I was going to send it to him today then it hit my gut and I thought logically.
So I went back and said change of plans, I want to do the exchange with my friend.
What's funny is since I told him that I'd like to do the exchange with my friend in person again, he hasn't responded. If he doesn't respond from this point on, I think I made the best decision of the century, because it was obviously a scam.
I was going to send it to him today then it hit my gut and I thought logically.
So I went back and said change of plans, I want to do the exchange with my friend.
What's funny is since I told him that I'd like to do the exchange with my friend in person again, he hasn't responded. If he doesn't respond from this point on, I think I made the best decision of the century, because it was obviously a scam.
more...
minik
Oct 27, 11:29 PM
I saw some people just took the Leopard T-shirts and left the store.
Enterprise8875
Oct 17, 03:38 PM
I am at UConn am was thinking of going but now i hear the coop may be selling it for only $70 so I will have to look into that before driving and paying more.
more...
Soura2112
May 5, 02:52 PM
[QUOTE=4God;12520756]You mean NAB?
Lol that's what I ment... I'm a drummer so NAMM just came out accidentally.
Of course I don't expect any news from you guys, just a better video and highlights from Apple rather then the bloggers there (no offense to bloggers thanks for getting the info up).
I want it day 1 mainly to learn it as fast as possible and see how FCX 64bit works on my Mac Pro, since I have been limited to Adobe and handbreak at the moment. I understand why people will wait, let's hope there's not many bugs to fix.
I understand not wanting competitors to see the product. I don't need the whole write up just a bit more of what's to come. The release is so close and I'm sure adobe and avid saw plenty of FCX so a little teaser trailer would be cool. I'm just excited to see how this program will work, it should be interesting. Let's hope it rocks!
Lol that's what I ment... I'm a drummer so NAMM just came out accidentally.
Of course I don't expect any news from you guys, just a better video and highlights from Apple rather then the bloggers there (no offense to bloggers thanks for getting the info up).
I want it day 1 mainly to learn it as fast as possible and see how FCX 64bit works on my Mac Pro, since I have been limited to Adobe and handbreak at the moment. I understand why people will wait, let's hope there's not many bugs to fix.
I understand not wanting competitors to see the product. I don't need the whole write up just a bit more of what's to come. The release is so close and I'm sure adobe and avid saw plenty of FCX so a little teaser trailer would be cool. I'm just excited to see how this program will work, it should be interesting. Let's hope it rocks!
mnkeybsness
Aug 25, 06:05 PM
are you surrounding the <embed> tag with an <object> tag?
<object height="24" width="100">
<embed src="mysongname.mp3" autostart="true" hidden="true" loop="true" />
</object>
<object height="24" width="100">
<embed src="mysongname.mp3" autostart="true" hidden="true" loop="true" />
</object>
more...
anng12
Mar 11, 02:18 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
60-70 in line
60-70 in line
Dreadnought
Nov 3, 12:33 PM
Sparky, I have my G5 on a time switch to reduce power consumption. It only folds when it's on (obviously), so that's about 6-7 hours a day. So, now is your chance to come close to me! Overtaking me is a whole different story!! :D Also, does increase come in a dual proc setup and does it/folding start automatically at startup?
How much faster the console version is Vs. the GUI client is hard to say. It really depends on how fast your Mac is. If you have an older Mac (say G3) then it's a significant difference. You have a bit of overhead on your proc of the images, which aren't completely for the Graphics card. Your proc also has to process it, giving a bit of overhead. My G3 400 Mhz B&W had a lot of this overhead with the GUI client. Increase will also give a bit, but less, overhead.
How much faster the console version is Vs. the GUI client is hard to say. It really depends on how fast your Mac is. If you have an older Mac (say G3) then it's a significant difference. You have a bit of overhead on your proc of the images, which aren't completely for the Graphics card. Your proc also has to process it, giving a bit of overhead. My G3 400 Mhz B&W had a lot of this overhead with the GUI client. Increase will also give a bit, but less, overhead.
more...
Blue Velvet
Dec 9, 10:46 AM
In our little corner of the office there's a noticeable and oppressive micro-climate produced by 3 x dual 2.5s, 2x733 Quicksilvers and 1x dual 1.25 G4 plus 4x22" monitors and assorted printers, scanners and peripherals.
Everybody who comes up here remarks on how warm it is and that's with the air-con on... in the winter. We also have a few fans to stir the air up as well and I have a small desk one to keep me cool... particularly when I'm getting cross with internal clients. :)
Everybody who comes up here remarks on how warm it is and that's with the air-con on... in the winter. We also have a few fans to stir the air up as well and I have a small desk one to keep me cool... particularly when I'm getting cross with internal clients. :)
heylookitskarl
Feb 22, 07:45 AM
If the position you were applying for was full-time that could be a HUGE factor. Because how many high-school students can work from 3pm - 12am and then be able to go back to work at 10am. If it was part time maybe they felt some other applicants had a stronger resume or they may have felt they want someone with more experience. You never truly no unless you ask a manager who interviewed you.
Yea I never thought about the hours but just about every store closes around 10:00 and I was able to work from 4:00-9:00 after school. It was not an interview but a seminar (but I guess your right).... Does anyone know how to get my application seen by the store manager?? I talked to the store manager in the Garden State Plaza NJ and she said that the corporate office in CA took care of all the applications and she will never see the application until it gets screened through.
Does anyone know someone who knows someone?? =P
Yea I never thought about the hours but just about every store closes around 10:00 and I was able to work from 4:00-9:00 after school. It was not an interview but a seminar (but I guess your right).... Does anyone know how to get my application seen by the store manager?? I talked to the store manager in the Garden State Plaza NJ and she said that the corporate office in CA took care of all the applications and she will never see the application until it gets screened through.
Does anyone know someone who knows someone?? =P
more...
rmlred
Mar 12, 10:55 PM
Here is two of my personal videos:
http://vimeo.com/20635583
http://vimeo.com/20087249
Here is 2 teaser video I edited for a small promotion company(I also do there weekly wedisode but they are 10-13 mins long and Im not trying to take up any ones time):
Photo shoot with chicks- http://www.youtube.com/watch?v=NzVdVw_LF8w
Bojangles Coliseum mud races(camera was not set to full HD and contrast is way too high)- http://www.youtube.com/watch?v=Zb-_PeuCyto
All of this is edited with Adobe Premier and shot with Canon Vixia HF s200.
A teacher at school has requested I be one the school new team next year editing the show, should be fun.
http://vimeo.com/20635583
http://vimeo.com/20087249
Here is 2 teaser video I edited for a small promotion company(I also do there weekly wedisode but they are 10-13 mins long and Im not trying to take up any ones time):
Photo shoot with chicks- http://www.youtube.com/watch?v=NzVdVw_LF8w
Bojangles Coliseum mud races(camera was not set to full HD and contrast is way too high)- http://www.youtube.com/watch?v=Zb-_PeuCyto
All of this is edited with Adobe Premier and shot with Canon Vixia HF s200.
A teacher at school has requested I be one the school new team next year editing the show, should be fun.
cosmos
Apr 28, 03:17 AM
I would say that it is a toss up at this point whether the new Mini will get either the HD 2000 or HD 3000 graphics. I would hope for the better, but Apple has upgraded CPUs and opted for less powerful GPUs in the past.
I guess that it depends on the price point that they can get. At this point in time, it really is anyones guess outside of the citadel of Cuppertino. If I were in the market for a Mini this would be a hard choice as the current 320Ms are very good for their class of GPU.
I guess that it depends on the price point that they can get. At this point in time, it really is anyones guess outside of the citadel of Cuppertino. If I were in the market for a Mini this would be a hard choice as the current 320Ms are very good for their class of GPU.
GotPro
Jan 17, 04:10 PM
I think Steve is going to be there giving free macbookair's away for free as no one is buying them
Um, not to be a jerk... but... it no one is buying them then why do they currently hold the #4 best selling notebook position at Amazon... and they aren't even available yet????
Um, not to be a jerk... but... it no one is buying them then why do they currently hold the #4 best selling notebook position at Amazon... and they aren't even available yet????
karsten
Nov 20, 04:10 PM
well i looked around the f@h website a bit, and found instructions for running the windows client through wine on linux. they are here: http://foldingforum.org/viewtopic.php?p=158848#p158848
so i figured i'd try to see if that could happen for osx.
i installed winebottler from http://winebottler.kronenberg.org/,
the os x cuda toolkit from http://developer.nvidia.com/object/cuda_3_2_downloads.html
then the gpu3 folding client from http://www.stanford.edu/~friedrim/.Folding@home-Win32-GPU_Vista-631.zip
ran the client in wine but i keep getting "Gpu species not recognized." errors from the folding client. i see theres a new version of the client available, i'll try that. thinking either that or the os x nvidia drivers are enough different from the windows ones that the client can't access it properly. this is on a 2009 mp with the gt120 which is fermi i think. tried both fermi and non- in the client but both gave that error. play around with it and see maybe what you all find:)
EDIT 1: I JUST TRIED THE NEWEST VERSION OF THE CLIENT, 6.40r1 AND IT NOW APPEARS TO DETECT THE GRAPHICS CARD! it sees the gt120 as Gpu type=3 species=20. the client downloads the core then it crashes when it tries to run with Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -checkpoint 15 -verbose -lifeline 63 -version 641'
[22:17:18] CoreStatus = C0000135 (-1073741515)
[22:17:18] Client-core communications error: ERROR 0xc0000135
[22:17:18] This is a sign of more serious problems, shutting down.
will continue to try to get this to work :)
EDIT 2: I missed the part to install some wrappers. going to see if that helps. apparently from http://foldingforum.org/viewtopic.php?f=59&t=16783 someone said gpu2 ran on os x so maybe it's possible
so i figured i'd try to see if that could happen for osx.
i installed winebottler from http://winebottler.kronenberg.org/,
the os x cuda toolkit from http://developer.nvidia.com/object/cuda_3_2_downloads.html
then the gpu3 folding client from http://www.stanford.edu/~friedrim/.Folding@home-Win32-GPU_Vista-631.zip
ran the client in wine but i keep getting "Gpu species not recognized." errors from the folding client. i see theres a new version of the client available, i'll try that. thinking either that or the os x nvidia drivers are enough different from the windows ones that the client can't access it properly. this is on a 2009 mp with the gt120 which is fermi i think. tried both fermi and non- in the client but both gave that error. play around with it and see maybe what you all find:)
EDIT 1: I JUST TRIED THE NEWEST VERSION OF THE CLIENT, 6.40r1 AND IT NOW APPEARS TO DETECT THE GRAPHICS CARD! it sees the gt120 as Gpu type=3 species=20. the client downloads the core then it crashes when it tries to run with Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -checkpoint 15 -verbose -lifeline 63 -version 641'
[22:17:18] CoreStatus = C0000135 (-1073741515)
[22:17:18] Client-core communications error: ERROR 0xc0000135
[22:17:18] This is a sign of more serious problems, shutting down.
will continue to try to get this to work :)
EDIT 2: I missed the part to install some wrappers. going to see if that helps. apparently from http://foldingforum.org/viewtopic.php?f=59&t=16783 someone said gpu2 ran on os x so maybe it's possible
mauros
Jun 23, 06:11 PM
I'll be there at the opening....
DeusInvictus7
May 6, 09:25 AM
Caviar Black here in my i7 27".
KeithPratt
Apr 15, 06:02 PM
It does not matter if iMovie2 saved it as DV or iMovie5 saved it as DV, right?
It's coming out of the ADVC300 as DV and iMovie is simply saving that as a file on your computer.
to be frank, i would wait for the new computer which will have imovie11 bundled. i have no idea what early versions of imovie do to footage on import, but it's probably not nice.
It's the newer versions of iMovie that "do stuff" to your video on import. The last version of iMovie I used was '06, and that would import DV like a file transfer from tape to hard drive. You'd need to fetch the fainting salts if you were to tell me '05 and earlier meddled with DV footage on import.
It's coming out of the ADVC300 as DV and iMovie is simply saving that as a file on your computer.
to be frank, i would wait for the new computer which will have imovie11 bundled. i have no idea what early versions of imovie do to footage on import, but it's probably not nice.
It's the newer versions of iMovie that "do stuff" to your video on import. The last version of iMovie I used was '06, and that would import DV like a file transfer from tape to hard drive. You'd need to fetch the fainting salts if you were to tell me '05 and earlier meddled with DV footage on import.
lanulos
Feb 9, 08:16 PM
To use iFile to install a deb, here is how I do it:
Download the .deb to your computer.
Open iFile on your ipod, and click on the WiFi logo on the bottom.
A page of text will display, with a url at the end, something like "http://192.168.xxx.xxx:10000".
Enter the url into the browser on your computer.
A root directory of your ipod will appear in the browser, with an upload box.
Use the upload box to put the .deb somewhere on your ipod, like in /tmp.
In iFile, tap Done and browse to the .deb, and tap it, then tap Installer in the menu. It should then install.
Download the .deb to your computer.
Open iFile on your ipod, and click on the WiFi logo on the bottom.
A page of text will display, with a url at the end, something like "http://192.168.xxx.xxx:10000".
Enter the url into the browser on your computer.
A root directory of your ipod will appear in the browser, with an upload box.
Use the upload box to put the .deb somewhere on your ipod, like in /tmp.
In iFile, tap Done and browse to the .deb, and tap it, then tap Installer in the menu. It should then install.
No comments:
Post a Comment